Development of metal organic framework (MOF) films for selectively positioning inhibitors in metallic anticorrosion applications remains a substantial challenge due to the difficulty of controlling the arrangement of inhibitor molecules in MOF pores. Cetyltrimethyl ammonium bromide (CTAB), which contains hydrophobic and hydrophilic tails, was chosen as a prototypical inhibitor and was selectively located in the pores of the classic HKUST-1 thin film on a metallic surface. Experimental results reveal that the prepared [email protected] film displays good metallic anticorrosion performances, especially for bronze conservation. A possible anticorrosion mechanism of [email protected] is proposed and fully discussed. The study provides an avenue for developing MOF-based thin films for metallic anticorrosion applications to address the environmental development issues related to corrosion.
Development of an anti-icing surface on a desired industrial coating patch/object has been the persistent challenge to several industries, such as aviation and wind power. For this aim, performing surface modification to implement the icephobic property on existing commercial coatings is important for practical applications. This work accomplishes an icephobic coating overlying a PPG aerospace polyurethane coating. It manifests a clear capability to delay the formation of frost as well as to reduce the adhesion strength of ice. This icephobic coating is sustained by a unique hydrophobic heterogeneity in the micron-scale of segregation, which is realized through solution casting of a specific copolymer consisting of random rigid and soft segments, namely poly(methyl methacrylate) and poly(lauryl methacrylate-2-hydroxy-3-(1-amino dodecyl)propyl methacrylate), respectively. A wrinkled pattern developed over the coating is observed because of the diverse traits between these two segments. Besides, the OH/NH groups of the soft segment are crosslinked by a diisocyanate monomer upon drying and curing to strengthen the coating. More importantly, integration of a small dose of paraffin wax into the copolymer induces a spread of soft microdomains on the winkled pattern surface. It is hypothesized that these dual heterogeneous assemblies are responsible for the icephobicity since they instigate distinct interactions with condensed water droplets. Lastly, the thermoelectric cooling (Peltier effect) and the adhesion strength of ice on the typical coatings were assessed. This investigation also includes examination on the icephobic durability of coating, which is enhanced when a small amount of polyethylene oligomer is incorporated into the coating.
Graphene aerogel (GA) has shown great promise as reinforcement of polymeric composites with exceptional electrical and mechanical characteristics. Although there has been significant progress in controlling the structure of GAs, no studies have appeared on the enhanced properties of GAs by employing high-quality precursor graphene flakes (GFs). However, the assembly of high-quality GFs is particularly challenging due to their highly hydrophobic and agglomerative nature in aqueous media, and of the few methods available to synthesize high-quality GFs, most produce flakes with very small lateral sizes. Herein, we report the fabrication of highly crystalline GAs using large nonoxidized graphene flakes (NOGFs) prepared by a novel graphite intercalation compound-based method. Bidirectional freeze casting is utilized for aligning NOGFs in two orthogonal directions, vertically and laterally, where the NOGF walls individually function as effective conductive pathways. The as-prepared nonoxidized graphene aerogel (NOGA) exhibits a defect concentration as low as 1.4% of impurity oxygen with an excellent electrical conductivity of 202.9 S/m at a low density of 5.7 mg/cm(3). The corresponding NOGA-epoxy composite shows a remarkable electrical conductivity of 122.6 S/m and a fracture toughness of 1.74 MPa.m(1/2) at a low filler content of 0.45 vol %.
Enhancing the mechanical durability of anti fingerprint films is critical for its industrial application on touch-screen devices to withstand friction damage from repeated rubbing in daily usage. Using reactive molecular dynamics simulations, we herein implement adhesion, mechanical, and deposition tests to investigate two durability-determining factors: intrachain and interchain strength, which affect the structural stability of the antifingerprint film (perfluoropolyether) on silica. From the intrachain perspective, it is found that the Si-C bond in the polymer chain is the weakest, and therefore prone to dissociation and potentially forming a C-O bond. This behavior is demonstrated consistently, regardless of the cross-linking density between polymer chains. For the interchain interaction, increasing the chain length enhances the mechanical properties of the film. Furthermore, the chain deposition test, mimicking the experimental coating process, demonstrates that placing shorter chains first to the surface of silica and then depositing longer chains is an ideal way to improve the interchain interaction in the film structure. The current study reveals a clear pathway to optimize the configuration of the polymer chain as well as its film structure to prolong the product life of the coated antifingerprint film.
Membrane-based separations have been increasingly utilized to address global energy crisis and water scarcity. However, the separation efficiency often suffers from the trade-off between membrane permeability and selectivity. Although great efforts have been devoted, a membrane with both high permeability and high selectivity remains a distant prospect. Inspired by the hourglass structure and ultrafast water transport in aquaporins, we propose a novel approach to fabricating membranes with conical nanochannels to reduce the mass transfer resistance and to introduce Laplace pressure as the internal driving force, which successfully breaks the permeability/selectivity trade-off. First, sulfonated polyaniline (SPANI) nanorods were in situ-synthesized and vertically aligned on sulfonated graphene oxide (SGO) nanosheets, forming SGO-SPANI(x) composites. Then, the graphene oxide (GO) membranes were fabricated by assembling SGO-SPANI(x) composites through pressure-assisted filtration, in which the SPANI nanorods would bend and flatten on the SGO nanosheets under low shear force, forming stripe arrays on SGO nanosheets. The tilted stripe arrays between the adjacent SGO nanosheets form the conical nanochannels inside GO membranes. The conical nanochannels significantly decreased the steric hindrance and enabled the generation of Laplace pressure as the internal driving force within membranes. Consequently, the resulting membranes exhibit an ultrahigh water permeability of 1222.77 L.m(-2).h(-1). bar(-1) and high efficiency in dye removal from water with a rejection of 90.44% and permeability of 528 L.m(-2).h(-1).bar(-1).
We introduce the design of Janus-type paper sheets where one side of the paper exhibits superhydrophobic properties, whereas the other side of the sheet remains hydrophilic and therefore can take up aqueous solutions by capillary wicking. Such papers are being prepared by chemically immobilizing a thin hybrid coating on paper sheets that consists of cross-linked poly(dimethylsiloxane) (PDMS) and inorganic particles of various sizes ranging from nanometers to several tens of micrometers. Both commercially available Whatman No. 1 filter paper and lab-engineered cotton linters-based paper substrates were treated with this approach. The hybrid paper sheets have high chemical durability, mechanical stability, and flexibility because of a covalent attachment of the particles to paper fibers and the inherent elasticity of PDMS chains. In spite of the superhydrophobicity of the coating, the untreated side of the paper substrates preserved its hydrophilicity, resulting in Janus type wetting and wicking properties, respectively. The functionalized paper samples remained porous and permeable to gases, while possessing a gradual change in chemistry between the two sides exhibiting a dramatic wetting contrast. Such two-sided properties open up new applications for such hybrid paper materials, such as in wound dressings and/or bandages with a liquid directing and confinement ability.
For solar-driven macroscopic motions, we assert that there is a local heating that facilitates large-scale deformations in anisotropic morphologic materials caused by thermal gradients. This report specifically identifies the fate of heat generation in photonastic materials and demonstrates how heat can perform work following excitation of a nonisomerizing dye. Utilizing the electrospinning technique, we have created a series of anisotropic nanofibrous polymer mats that comprise nonisomerizing dyes. Polymers are chosen because of their relative glass transition temperatures, elastic moduli, and melting temperatures. Light irradiation of these polymer mats with an excitation wavelength matching the absorption characteristics of the dye leads to macroscopic deformation of the mat. Analysis of still images extracted from digital videos provides plots of angular displacement vs power. The data were analyzed in terms of a photothermal model. Analyses of scanning electron microscopy micrographs for all samples are consistent to local melting in low T-g polymers and softening in high T-g polymers. Dynamic mechanical analysis allowed for quantification of the modulus change under a given light fluence. We employ these data to calculate a energy conversion efficiency. These efficiencies for the polymer mats are compared to other nonmuscular systems, including a few natural, biological samples.
The design of smart surfaces with externally triggerable water/oil wettability and adhesion represents one of the most up-to-date challenges in the field of material science. In this work, the intelligent surface with electrically triggerable wettability and water/oil adhesion is presented. As a basic material background exhibiting electric field (EF) sensitivity, the piezo-responsive polymethylmethacrylate/polyvinylidenefluoride polymer fibers were used. To expand the available range of water/oil contact angles (CAs) and adhesion, the fibers were grafted with hydrophilic or hydrophobic functional groups using diazonium chemistry. The fiber functionality was evaluated using the static CA and wettability hysteresis measurements (increasing/decreasing drop volume and tilting angles), drops adhesion/repellence and graphite self-cleaning test performed with and without the application of EF. It was found that the proposed method enables tuning the surface wettability in the superhydrophobic/superoleophobic hydrophilic/oleophilic range and changing of surface properties from low adhesive to high adhesive for water and oil. More convincing results were achieved in the case of fiber surface modification by ADT-C8F17, which may result from a rearrangement of the grated-C6H4C8F17 functional group under the application of EF triggering. Moreover, the triggering which can be performed in the extremely fast way (the surface responds to the EF switching on/off in seconds) was found to be fully reversible. Finally, the additional tests indicate the satisfactory stability of created fiber-based coating against the mechanical treatment.
In the past decades, enormous efforts have been made to synthesize photocatalysts for N-2 conversion driven by visible light. However, it is still a major challenge to develop an efficient photocatalyst. In this paper, monodoped and codoped TiO2 nanofibers were fabricated by vapor-phase growth. Vapor-phase implantation of the guest atoms into TiO2 nanofibers may greatly prolong the lifetime of electron hole pairs. The doped TiO2 nanofibers were demonstrated to be an excellent photocatalyst for nitrogen photofixation under a 300 W Xe-lamp irradiation. The amount of ammonia produced over the Fe, V codoped TiO2 nanofibers reached 14 783 mu mol/L.g-cata after irradiation for 2 h. The strategy could be easily extended to prepare other species doped TiO2 nanofibers as high-efficiency photocatalysts.
Hierarchical nanosheet-based nanotubes are very attractive because their unique structure endows them with large surface areas and exposes massive active sites for functional applications. We herein demonstrate a facile one-pot hydrothermal approach to fabricate the hierarchical nanosheet-based MS2 (M = Re, Mo, W) nanotubes by using Te nanowires as sacrificial templates. The hierarchical nanotubes show tube channels of similar to 30 nm and hierarchical channel walls with a tunable thickness of up to similar to 50 nm. As exemplified for application in Li-ion and Na-ion batteries, the ReS2 hierarchical nanotubes exhibit excellent specific capacities (1137 mA h g(-1) for Li-ion batteries and 375 mA h g(-1) for Na-ion batteries at 0.1 A g(-1) after 100 cycles), good cycling stabilities, and high rate capabilities, demonstrating their promising applicability in rechargeable batteries. This work may open up new opportunities for further exploration of new types of hierarchical nanostructures for applications, e.g., in catalysis, energy chemistry, and gas adsorption and separation.
Developing high-performance electrode materials with high energy and long-term cycling stability is a hot topic and of great importance for sodium ion batteries (SIBs). In this work, a highly porous carbon/tin sulfide aerogel with a "skeleton/skin" morphology ([email protected]) has been developed and further used as a binder-free anode for SIBs. This [email protected] SnS2 electrode delivers a high specific capacity of 612 mA h g(-1) at 0.1 A g(-1), a good rate capability, and a long-term cycling stability up to 1000 times with an average Coulombic efficiency of similar to 99.9%. Meanwhile, this [email protected] aerogel also achieves a stable cycling performance even at a high current density up to 5.0 A g(-1). The fast-yet-stable sodium ion storage performance of the prepared [email protected] aerogel can be ascribed to the reasons that (i) the carbon nanofiber/graphene skeleton provides unimpeded pathways for the rapid transfer of electrons; (ii) thin SnS2 skin with nonaggregated morphology can provide a great number of active sites for sodium ion storage; (iii) the porous structure of the [email protected] aerogel ensures a rapid penetration of electrolyte and can further accommodate the volume expansion of active SnS2 nanoflakes; and (iv) the intermediate product of Na15Sn4 alloy contributes greatly to the sodium ion storage performance of the [email protected] aerogel. The excellent electrochemical performances coupling with the unique structural features of this [email protected] aerogel make it a promising anode candidate for SIBs.
Conductive polymer (CP) nanotubes are fascinating nanostructures with high electrical conductivity, fast charge/discharge capability, and high mechanical strength. Despite these attractive physical properties, progress in the synthesis of CP nanotube hydrogels is still limited. Here, we report a facile and effective approach for the synthesis of polypyrrole (PPy) nanotube hydrogels by using the weakly interconnected network of self-assembled nanotubes of lithocholic acid as a soft template. The PPy nanotube hydrogels are then converted to aerogels by freeze drying, in which PPy nanotubes form elastic and conductive networks with a density of 38 mg/cm(3) and an electrical conductivity of 1.13 S/m. The PPy nanotube aerogels are able to sustain a compressive strain as high as 70% and show an excellent cyclic compressibility due to their robust nanotube networks and hierarchically porous structures, which allow the compressive stress to be easily dissipated. Furthermore, PPy nanotube aerogels show negative strain-dependent electrical resistance changes under compressive strains. The lightweight, elastic, and conductive PPy nanotube aerogels may find potential applications in strain sensors, supercapacitors, and tissue scaffolds.
To enable affordable detection and diagnostic, there is a need for low-cost and mass producible miniaturized sensing platforms. We present a fully polymeric microfluidic lab-on-a-chip device with integrated gold (Au)-capped nanocones for sensing applications based on surface-enhanced Raman spectroscopy (SERS). All base components of the device were fabricated via injection molding (IM) and can be easily integrated using ultrasonic welding. The SERS sensor array, embedded in the bottom of a fluidic channel, was created by evaporating Au onto IM nanocone structures, resulting in densely packed Au-capped SERS active nanostructures. Using a Raman active model analyte, trans-1,2-bis-(4-pyridyl)-ethylene, we found a surface-averaged SERS enhancement factor of similar to 5 x 10(6) with a relative standard deviation of 14% over the sensor area (2 x 2 mm(2)), and a 18% signal variation among substrates. This reproducible fabrication method is cost-effective, less time consuming, and allows mass production of fully integrated polymeric, microfluidic systems with embedded high-density and high-aspect ratio SERS sensor.
Heteroatom-doped porous carbons are emerging as platforms for gas adsorption. Herein, N-doped microporous carbon (NPC) materials have been synthesized by carbonization of two pyridine ligand-based metal-organic complexes (MOCs) at high temperatures (800, 900, 1000, and 1100 degrees C). For NPCs (termed NPC-1-T and NPC-2-T, where T represents the carbonization temperature), the micropore is dominant, pyridinic-N and other N atoms of MOC precursors are mostly retained, and the N content reaches as high as 16.61%. They all show high Brunauer-Emmett-Teller surface area and pore volume, in particular, NPC-1-900 exhibits the highest surface areas and pore volumes, up to 1656.2 m(2) g(-1) and 1.29 cm(3) respectively, a high content of pyridinic-N (7.3%), and a considerable amount of SO2 capture (118.1 mg g(-1)). Theoretical calculation (int = ultrafine m062x) indicates that pyridinic-N acts as the leading active sites contributing to high SO2 adsorption and that the higher content of pyridinic-N doping into the graphite carbon layer structure could change the electrostatic surface potential, as well as the local electronic density, which enhanced SO2 absorption on carbon edge positions. The results show great potential for the preparation of microporous carbon materials from pyridine ligand-based MOCs for effective SO2 adsorption.
When a vertically stacked heterobilayer comprising of a WSe2 monolayer on a WS2 monolayer is first fabricated, the heterobilayer behaves like two independent monolayers because of the presence of a large interlayer separation. However, after the stacked heterobilayer is subjected to a focused laser treatment, the interlayer separation between the two monolayers becomes progressively reduced which transforms the WS2/WSe2 hetero-structure from the noncoupling to the strongly coupling regime. This strong coupling induces the charge transfer between two layers and thus lowers the exciton recombination rate in the individual layer. This changes the optical properties of the heterobilayer from a fluorescence-active species into one where the fluorescence is quenched. The focused laser beam scanning method is therefore able to serve as a localized annealing tool to progressively modulate the interlayer separation and enable the micropatterning of the heterobilayer to achieve distinct regions with different degrees of fluorescence quenching. Systematic studies are carried out to gain an insight into the mechanism involved in the onset of the interlayer coupling in the material. Our method is also successfully extended to a WS2/WS2 homobilayer structure.